|
CADquest News
· CADquest training at Johnson Controls / York International 20
June 2008
CADquest has completed another week of Pro/ENGINEER Wildfire 3.0 training at the JCI/York facility, located in York, PA. JCI/York is a manufacturer of commercial and military air conditioning equipment. Visit JCI/York online at http://www.york.com/ · CADquest training at Johnson Controls / York International 02
May 2008
CADquest has completed a week of Pro/ENGINEER Wildfire 3.0 training at the JCI/York facility, located in York, PA. JCI/York is a manufacturer of commercial and military air conditioning equipment. Visit JCI/York online at http://www.york.com/ · Johnson Controls/York purchase SmartAssembly software. 23
April 2008
Johnson Controls/York has purchased SmartAssembly software from Sigmaxim through CADquest. SmartAssembly is a programming language for Pro/E that can be used for a wide variety of applications. Earlier this year, CADquest became a reseller of SmartAssembly and other software applications from Sigmaxim. See SmartAssembly in action here. · CADquest delivers SmartAssembly solution to Tyco Electronics Germany. 04
April 2008
Steve traveled to Dinkelsbuehl Germany for Tyco Electronics to deliver the SmartAssembly driven moldbase package. This suite of programs is a complete design automation solution for HASCO, DME, and PCS moldbase design that was developed by CADquest. Check out some of these programs here. · CADquest moves into new office and textbook production facility. 10
December 2007
CADquest has moved into our new office and textbook production facility. Steve built a small addition on the back of our home for this facility, with his own two hands, and with little help from others. We are now printing and binding our own textbooks in this facility. This will eliminate shipping delays due to books being out of stock, and will also ensure the highest and consistent quality for our products. Check out the construction history of this facility here: http://www.cadquest.com/pictures/addition_2006/progress.htm · CADquest training at Johnson Controls / York International 30
October 2007
CADquest has completed three weeks of various Pro/ENGINEER Wildfire 3.0 training classes at the JCI/York facility, located in York, PA. JCI/York is a manufacturer of commercial and military air conditioning equipment. Visit JCI/York online at http://www.york.com/ · XDIN selects CADquest textbooks. 10
September 2007
The XDIN company, located in Gothenburg and Stockholm, Sweden, has selected CADquest’s textbooks for use in its Pro/ENGINEER training programs. XDIN is a provider of Pro/ENGINEER and CATIA training in Sweden and in the USA. We welcome this new company to our textbook family. Visit XDIN online at http://www.xdin.com/ · Hennepin Technical College selects CADquest textbook. 15
August 2007
The Hennepin Technical College, in Brooklyn Park and Eden Prairie, Minnesota, has selected CADquest’s “Pro/ENGINEER Wildfire 3.0 Basic Design” textbook for use in the fall 2007 semester. We welcome this new college to our textbook family. Visit the Hennepin Technical College online at http://www.hennepintech.edu/ · CADquest training at Johnson Controls / York International 18
May 2007
CADquest has completed two weeks of on-site training at JCI/York, located in York, PA. JCI/York is a manufacturer of commercial air conditioning equipment. Visit JCI/York online at http://www.york.com/ · CADquest training at Case New Holland. 02
February 2007
CADquest has completed a week of on-site training at Case New Holland (CNH), located in New Holland, PA. CNH is a manufacturer of agriculture and construction equipment. Visit CNH online at http://www.cnh.com/ · CADquest develops moldbase automation solution at Tyco Electronics. 18
September 2006
CADquest has been contracted to develop and implement solutions for moldbase design automation for Tyco Electronics Corporation, a manufacturer of electronic connectors located in Harrisburg, PA. Visit Tyco Electronics online at http://www.tycoelectronics.com/ · CADquest training at Steris Corporation. 16
June 2006
CADquest has completed a week of on-site training at Steris Corporation, located in Erie, PA. Classes included sheetmetal and piping. Steris is a manufacturer of sterilizers for the medical industry. Visit Steris online at http://www.steris.com/ · CADquest exhibits at PTC/USER World Event. 07
June 2006
We had a successful exhibit at the 2006 PTC/USER World Event in Dallas Texas. Our booth was busy, and we enjoyed seeing many of our existing customers that stopped in to say hello. We would like to thank all PTC/USER attendees that visited us at the event. · LuK USA selects CADquest textbook. 04
January 2006
LuK USA, located in Wooster, Ohio, part of the Scheaffler Group, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Update Manual for 2001 Users” for internal update training. LuK USA is a manufacturer of clutches and other drivetrain components for the global automotive industry. Visit LuK USA online at http://www.lukusa.com/ · The Las Positas College selects CADquest textbook. 30
December 2005
The Las Positas College, in Livermore, California, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Sheetmetal Design” textbook for use in the spring 2006 semester. We welcome this new college to our textbook family. Visit the Las Positas College online at http://www.laspositascollege.edu/ · The University of New Mexico selects CADquest textbook. 29
December 2005
The University of New Mexico, in Albuquerque, New Mexico, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Intermediate Design” textbook for use in the spring 2006 semester. We welcome this new college to our textbook family. Visit the University of New Mexico online at http://www.unm.edu/ · The Pittsburg State University selects CADquest textbook. 29
December 2005
The Pittsburg State University, in Pittsburg, Kansas, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Introduction to Mechanism Design” textbook for use in the spring 2006 semester. Visit the Pittsburg State University online at http://www.pittstate.edu/ · CADquest’s new Shopping Cart and Secure Checkout is now available. 26
December 2005
CADquest is pleased to announce our new online shopping cart and secure checkout, powered by Americartâ, is now available. This is a long overdue upgrade to our web site. Click here to checkout our new shopping cart. · CADquest publishes “Pro/E Wildfire 3.0 Update Manual”. 18
November 2005
CADquest has published our first Wildfire 3.0 textbook: “Pro/ENGINEER 3.0 Update Manual for Wildfire 2.0 Users”. Wildfire 3.0 has many exciting enhancements and new features that make this the best Wildfire so far. Click here for more information about this new textbook. · Tyco Electronics joins the CADquest textbook subscription program. 12
September 2005
Tyco Electronics, Harrisburg, PA, has joined CADquest’s textbook subscription program. This program allows companies to access all of CADquest’s textbooks in electronic (PDF) format. A copyright license to print and use the materials for internal training is included. Click here for more information about the CADquest textbook subscription program. Visit Tyco Electronics online at http://www.tycoelectronics.com/ · The California State University, Fullerton, selects CADquest textbooks. 15
August 2005
The California State University, Fullerton, in Fullerton, California, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Basic Design” and “Pro/ENGINEER Wildfire 2.0 Intermediate Design” textbooks for use in the fall 2005 semester. Cal State Fullerton is a long time customer of CADquest. Visit Cal State Fullerton online at http://www.fullerton.edu/ · The University of Notre Dame selects CADquest textbook. 11
August 2005
The University of Notre Dame, in Notre Dame, Indiana, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Basic Design” textbook for use in the fall 2005 semester. We welcome this new college to our textbook family. Visit the University of Notre Dame online at http://www.nd.edu/ · The Pittsburg State University selects CADquest textbook. 08
August 2005
The Pittsburg State University, in Pittsburg, Kansas, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Basic Design” textbook for use in the fall 2005 semester. We welcome this new college to our textbook family. Visit the Pittsburg State University online at http://www.pittstate.edu/ · The University of Illinois selects CADquest textbook. 02
August 2005
The University of Illinois, in Champaign, Illinois, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Basic Design” textbook for use in the fall 2005 semester. The University of Illinois is a long time customer of CADquest. Visit the University of Illinois online at http://www.uiuc.edu/ · INA USA Corporation selects CADquest textbook. 01
August 2005
INA USA Corporation, Fort Mill, South Carolina, part of the Scheaffler Group, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Update Manual for 2001 Users” for internal update training. INA USA Corporation is a manufacturer of roller bearings and other products for the automotive industry. Visit INA USA online at http://www.us.ina.com/ · The New York City College of Technology selects CADquest textbook. 26
July 2005
The New York City College of Technology, the senior-level college of technology of The City University of New York, in Brooklyn, New York, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Introduction to Mechanism Design” textbook for use in the fall 2005 semester. We welcome this new college to our textbook family. Visit the New York City College of Technology online at http://www.citytech.cuny.edu/ · Congratulations to BAE Systems / United Defense. 29
June 2005
BAE Systems was recently awarded a $1.127 billion contract to refit and upgrade over 500 Bradley Combat Vehicles for the U.S. Army. BAE Systems recently purchased United Defense. Both BAE Systems and United Defense are good customers of CADquest, and we congratulate them on winning this contract. Read more about this contract on the BAE Systems website at http://www.baesystems.com/newsroom/2005/jun/270605news3.htm · PTC releases Pro/ENGINEER Wildfire 3.0 Pre-Production. 01
June 2005
We downloaded and installed the first pre-production version of Pro/ENGINEER Wildfire 3.0 today. After an initial evaluation period, our entire line of textbooks will be updated to this new release. FYI, we crashed it within the first hour of casual use. · Sun Microsystems selects CADquest textbook. 25
April 2005
Sun Microsystems, Menlo Park, California, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Update Manual for 2001 Users” for internal update training. Sun Microsystems is a manufacturer of computing systems. Visit Sun online at http://www.sun.com/ · CADquest officially closes our Harrisburg training center. 26
February 2005
After a very successful seven years, CADquest has closed our Harrisburg training center. Moving out of the office suite was a monumental physical task, as well as an emotional time for us. Steve is now concentrating on writing Pro/ENGINEER textbooks. Expect a series of new Pro/ENGINEER textbooks from CADquest over the next 18 months. Visit the old classroom online at http://www.cadquest.com/pictures/classroom.bmp · Teleflex Canada selects CADquest textbook. 10
February 2005
Teleflex Canada in Richmond, BC, Canada has selected CADquest’s “Pro/INTRALINK 3.3 User’s Guide” for internal training. Teleflex is a manufacturer of hydraulic steering systems for the marine industry. Visit Teleflex Canada online at http://www.teleflexcanada.com/ · Thaddeus Stevens College of Technology selects CADquest textbook. 20
December 2004
The Thaddeus Stevens College of Technology in Lancaster, Pennsylvania, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Sheetmetal Design” textbook for use in the spring 2005 semester. We welcome this new college to our textbook family. Visit Thaddeus Stevens College of Technology online at http://www.stevenstech.org/ · Owens Community College selects CADquest textbook. 12
December 2004
Owens Community College in Findlay, Ohio, has selected CADquest’s “Pro/ENGINEER Wildfire 2.0 Basic Design” textbook for use in the spring 2005 semester. We welcome this new college to our textbook family. Visit Owens Community College online at http://www.owens.edu/ · ITT Industries joins the CADquest textbook subscription program. 07
October 2004
ITT Industries, Upper Saddle River, New Jersey, has joined CADquest’s textbook subscription program. This program allows companies to access all of CADquest’s textbooks in electronic (PDF) format. A copyright license to print and use the materials for internal training is included. Contact us for more information about the CADquest textbook subscription program. Visit ITT Industries online at http://www.itt.com/ |
